Advantages

• Swinghandle with liftable operating lever.
• For profile-cylinders to DIN 18252.
• Tool-less installation.
• a) 90° for RH doors with counter-clockwise opening.
• b) 90° for LH doors with clockwise opening.
• c) 180° opening.
• The rotation stop prevents a damaging over-rotation of cam / 3-point cam.
• IP65 according to DIN EN 60529 will be achieved by cap and o-ring.

Material

• Swinghandle, dish, cover and cap: PA6, black
• O-rings: NBR Perbunan
• Hexagon nut and washer: steel, zinc plated
• Shaft: brass, untreated
• Snap wedges: sintered steel
• Stop: zinc die, untreated

Remarks

1. guide swinghandle with pre-assembled cam through upper cutout.
2. hook-in the lower part of the swinghandle and clip it in at the top.
3. press cap on.

Drawings for rod calculation (see accessories):
1. stroke 18mm
2. clearance

Profile half cylinders and their assembly must be ordered separately.