Advantages

• For surface mounted doors.
• Hinge partly visible.
• Door bending 25mm.
• Frame-part snap-in, tool-less.
• Door-part screw-on.
• Due to an enlarged oblong hole, the doors are easy to lift-off.
• By an identical hole pattern in the frame the hinges can be replaced by dual hooks of product system 3-910DST.
• IP65 according to DIN EN 60529 by using the o-ring 200-1005.00-02420 (please order separately).
• 180° opening angle if hinges are installed on the right or on the left.
  140° opening angle if hinges are installed on the right and on the left.

Materials

• Frame-part and door-part: zinc die, black
• Snap wedges: sintered metal, coated
• Pin ø6x15: stainless steel
• Pin ø6x50: steel, zinc plated
• Washers: brass, nickel plated
• Spring washers and socket cylinder screws: steel, zinc plated

Remarks

1. At a gap dimension of 1mm the notch heigth is 7mm. Depending on the gap size the height of the notch differs.
2. Two socket cylinder screws M6x10 DIN 7984 and 2 spring washers DIN 7980 are included.