Advantages

• For surface mounted doors for adjacent cabinets
• Hinge partly visible
• Door bending 25mm
• RH/ LH application
• 180° Opening angle
• Door-part with pre-fitted and captive pin-halves
• At about 30° door opening the door can be pulled out, after retracting the pin-halves
• For door installation, the door is inserted into the frame at approx. 30 ° and the hinge pins are pressed in. (2.)
• Frame holes layout is also suitable for mounting dual hooks as on product system 3-170 or 3-910 shown allowing reversibility of door

Materials

• Frame-part, door-part and pin: zinc die, black
• Detent spring: spring steel

Remarks

1. Possible notching in the door for a gap of approx. 1-2mm between door and frame

3. 180° Opening angle if hinges are installed on the right or on the left
4. 146° Opening angle if hinges are installed on the right and on the left
5. Four socket cylinder screws M6x10 DIN 7984, 4 spring washers 6 DIN 7980 and 2 nuts M6 DIN 439 are included