Advantages

• For surface mounted doors for adjacent cabinets
• Hinge partly visible
• Door bending 25mm
• RH/ LH application
• Opening angle 180°
• Tool-less installation of frame- and door-part
• Door-part with pre-fitted and captive pin-halves
• At about 30° door opening the door can be pulled out, after retracting the pin-halves
• For door installation, the door is inserted into the frame at approx. 30 ° and the hinge pins are pressed in. (2.)
• IP65 according to DIN EN 60529 by o-ring 200-1005.00-02420 (please order separately)

Materials

• Frame-part, door-part and pin: zinc die, black
• Snap wedges: sintered metal, coated
• Detent spring: spring steel

Remarks

1. Possible notching in the door for a gap of 2mm between door and frame
3. Opening angle 180° if hinges are installed on the left and on the right

Frame holes layout is also suitable for mounting dual hooks as on product system 3-910DST shown allowing reversibility of door.