Advantages

• For surface mounted doors for adjacent cabinets.
• Hinge partly visible.
• Door bending 25mm.
• RH / LH application.
• 180° Opening angle.
• Tool-less installation of frame-part.
• Door-part with pre-fitted and captive pin-halves.
• At about 30° door opening the door can be pulled out, after retracting the pin-halves.
• For door installation, the door is inserted into the frame at approx. 30° and the hinge pins are pressed in. (2.)
• IP65 according to DIN EN 60529 (optional).

Material

• Frame- and door-part and pin: zinc die, black
• Snap wedges: sintered metal, coated
• Detent spring: spring steel

Remarks

1. Possible notching in the door for a gap of 2mm between door and frame.

3. 180° Opening angle if hinges are installed on the right or on the left.
4. 146° Opening angle if hinges are installed on thr right and on the left.

Frame holes layout is also suitable for mounting dual hooks as on product system 3-910DST shown allowing reversibility of door.