Advantages

• For surface mounted doors for adjacent cabinets.
• Hinge partly-concealed.
• Door bending 20mm.
• RH and LH version.
• 180° opening angle.
• Tool-less installation of frame- and door-part.
• Door can be lifted-off at 30° opening angle.
• Lift-off safety, the door can't be lifted-off in closed position.
• IP65 according to DIN EN 60529 by flat external seal (optional).

Material

• Frame- and door-part: zinc die, black
• Snap wedges: sintered steel
• Pin and spring: stainless steel
• Washer: brass, nickel plated
• Plug: NBR, black

Remarks

For uninstallation (1.) of the frame-part remove plug (2.). Frame-part can be disengaged from outside with a screw driver.
Possible notching in the door for a gap of approx. 1-2mm between door and frame.

Attention: If you use the external seal (only neccessary for the frame part), please order a larger clamping range.