• Flush-mounted version.
• Indication of opened/closed position on the housing edge and the insert.
• Vibration-proof.
• IP65 to DIN EN 60529.
• RH and LH version.
• The H-dimension can be varied via the cranking of the cam.
• The cam can be varied on the threaded square rod to ±11mm (GL 28) and ±6mm (GL 37) via nuts (included).

Material

• Housing, insert, threaded square rod, nut and anti-rotation device: AISI 316
• Serrated screw, serrated lock washers and nuts: stainless steel
• O-ring: NBR

Remarks

(S) Door-thickness max. 13mm at GL 28mm
(S) Door-thickness max. 22mm at GL 37mm
(S) Door-thickness min. 1.8mm
Negatively bent cams can not be installed pre-assembled.

1. compression 6mm
2. o-ring
3. nut
4. anti-rotation device (included in scope of delivery)
5. washer when using cylinder head screws or weld studs/nuts
6. optionally also available with H-dimension adjustment