Advantages

• Locking status can be evaluated.
• Security optimization.
• Vibration-proof according to DIN EN 61373.
• Tool-less installation.
• Matching cams as of 35 mm, product system 1-102 and 7-105.
• No abrasion of the metal and therefore safety concerning electronic built-in components.
• Good gliding properties, therefore low friction coefficient.
• The assembly will be carried out with the already installed quarter-turn, it is possible to retrofit at any time.
• The sliding ramp is attached to the frame by a prefabricated adhesive foil. (8.)

Material

• Slide show, sliding ramp: POM, natural
• Adhesive strip: PET

Remarks

The slide shoe cannot be used with the following cams: 200-0606, 200-0608, 200-0610, 200-0613, 200-0614, 200-0402, 200-0404, 200-0406, 200-0408, 200-0410, 200-0506, 200-0508 and 200-0510 and not for 3-point cams of product system 2-150, 1-102 and 7-105.

1. sliding ramp
2. slide shoe
3. place latch under the cam
4. slide housing onto the cam and the latch
5. latch must lock audibly into the window
6. ramp 3mm
7. attach sliding ramp to frame

Note: the H-dimension diminishes by 6mm.